• Скупка картриджей
  • Распродаем
  • Для бизнеса
  • Утилизируем
  • Отзывы
  • Соглашение
  •  

     

     

    Руководство по L300

    Важные инструкции для принтера

    Знакомство с принтером

    Идет печать

    Основные операции

    Двусторонняя печать

    Общий доступ к устройству для печати

    Перезаправка чернил

    Обслуживание

    Замена чернил

    Устранение неполадок с печатью

    Устранение неполадок с печатью

    Проблемы с отпечатоком, с бумагой

    Коды ошибок

     

    Коды ошибок принтера Epson L300

    Error codes Epson L300

    Код ошибки

    Описание

    Причина

    01H CR PID excess load error • CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Some part may be detached. (Paper Guide Upper Assy, Cap Assy) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Cable disconnection • Main Board failure (Motor driver failure) (замятие бумаги, посторонний предмет, зубчатка, привод грм)
    02H CR PID excess speed error • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Main Board failure (Motor driver failure) (датчик, мозги)
    03H CR PID reverse error • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Some external force is applied to the printer such as stopping the CR Unit during printer operation, vibration or the like. • Tooth skip of the CR Timing Belt • Paper jam • Main Board failure (Motor driver failure) (датчик, загрязнение, грм, замятая бумага, мозги)
    04H CR PID lock error • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Some part may be detached. (Paper Guide Upper Assy, Cap Assy) • Cable disconnection • Main Board failure (Motor driver failure) (датчик, загрязнение, грм, замятая бумага, мозги, кабель)
    08H CR load position reverse error • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Main Board failure (Motor driver failure) (датчик, мозги)
    09H CR load position excess speed error • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Paper jam • Main Board failure (Motor driver failure) (датчик, грм, замятая бумага, мозги)
    0AH CR load position excess load error • CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, Change Lever failure) • Cable disconnection • Main Board failure (Motor driver failure) (замятие бумаги, кабель, мозги)
    10H Home position detection error (Scanner) • CIS Module failure • Scanner Housing Upper failure (home seek pattern is dirty) • Scanner Housing Lower failure (the rack section is damaged) • Scanner Motor failure • Insufficient grease • Foreign object • FFC disconnection/failure • Main Board failure (загрязнение, посторонний предмет, мозги)
    20H LED lightning error (Scanner) • CIS Module failure • Foreign object • Scanner Housing Upper failure (white standard pattern is dirty) • Main Board failure (сканер, мозги)
    40H Transistor temperature error • Main Board failurere error (мозги)
    41H X-Hot detect error (pre printing) • Printhead failure • Main Board failure (головка, мозги)
    42H X-Hot detect error (after flushing) • Printhead failure • Main Board failure (головка, мозги)
    43H Head temperature error • Printhead failure • Main Board failure (головка, мозги)
    50H Home position error • Foreign object • Deformation of the Main Frame • Change Lever failure • Paper jam (посторонний предмет, застревание бумаги)
    56H Contact error at ink replacement timing (Power-off) • Foreign object • Ink Cartridges are not installed correctly • Paper jam (посторонний предмет, застревание бумаги, картриджи)
    5BH Insoluble paper jam error • Foreign object • Deformation of the Main Frame • Change Lever failure • Paper jam (посторонний предмет, застревание бумаги)
    D1H CR (PID) driving time error • Main Board failure (Firmware failure) (мозги)
    D2H CR (load position) driving time error • Change Lever failure • CR Motor failure • Main Board failure (Motor driver failure) (мозги)
    D3H PF (PID) driving time error • Main Board failure (Firmware failure) (мозги)
    D4H PF (BS) driving time error • Change Lever failure • CR Motor failure • Main Board failure (Motor driver failure) (мозги)
    F1H PF PID excess load error • PF Motor failure • PF drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Cable disconnection • Main Board failure (Motor driver failure) (посторонний предмет, застревание бумаги, грм, кабель)
    F2H PF PID excess speed error • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Main Board failure (Motor driver failure) (датчик, зубчатка, грм, мозги)
    F3H PF PID reverse error • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Paper jam • Paper is pulled out from the ASF side when paper is fed • Main Board failure (Motor driver failure) (датчик, бумага, мозги)
    F4H PF PID lock error • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • PF Motor failure • PF drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Cable disconnection • Main Board failure (Motor driver failure) (датчик, бумага, посторонний объект, кабель, мозги)
    F8H PF load position reverse error • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt (датчик)
    F9H PF load position excess speed error • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Main Board failure (Motor driver failure) (датчик, мозги)
    FAH PF load position excess load error • PF Motor failure • PF drive mechanism overload (paper jam, foreign object) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Cable disconnection (бумага, посторонний предмет, кабель)
    FCH PF load position error • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • PF Motor failure • PF drive mechanism overload (paper jam, foreign object) • Cable disconnection (грм, бумага, посторонний предмет, кабель)

    У струйных принтеров Epson L300 при прочистке печатающей головки отработанные чернила сливаются в специальную емкость с впитывающей прокладкой (“памперсом”). Специальный счетчик подсчитывает, когда емкость следует заменить и блокирует работу устройства. Существуют программы для сброса памперса (счетчика), однако для дальнейшей эксплуатации принтера также либо обновить материал “памперса” либо вообще, можно вывести слив памперса отработанных чернил наружу корпуса в какой-нибудь сосуд, хотя это и не очень удобно т.к. можно случайно пролить чернила из этого сосуда. Или можно разобрать принтер открутив 1 винт сзади корпуса, достать памперс, промыть и просушить впитывающий материал и продолжать пользоваться вашим принтером.

    <<<назад

     

    при использовании материалов ссылка на сайт awella.ru обязательна